About this deal
Connect the included USP Cable to a UniFi device with a USP Connect DC input. (Additional USP cables are sold separately as model USP-Cable.) The USP-RPS will continuously monitor all attached devices, in case of an internal AC/DC power supply failure. The USP-RPS fail-over is automatic, so your network continues to operate with no interruption in service. Some UniFi devices have a proprietary USP port that allows them to be connected using a Ubiquiti USP-Cable (sold separately).
USP-RPS overvåger løbende alle tilsluttede enheder. I tilfælde af intern AC / DC-strømforsyningsfejl er failover automatisk, så dit netværk fortsætter med at fungere uden afbrydelse i service. PoE+ and eight PoE++ RJ45 ethernet ports have total 400W PoE budget, and two SFP+ ports offer 10Gbps uplink options. Near-silent cooling and a 1.3" touch LCM. In the event of a UniFi switch power supply failure, the USP-RPS automatically supplies redundant power to the failed device. One UniFi SmartPower device can support up to 6 devices until the failed device is replaced. The Ubiquiti UniFi USP-RPS is a smartpower redundant power system, designed to protect up to 6 x UniFi SmartPower supported devices from sudden power supply module failure. This DC input provides redundant power when the UniFi Switch is connected to the UniFi SmartPower Redundant Power System, model USP-RPS, via the USP Cable (not included). If there is an AC power loss or internal power supply failure, the UniFi Switch will draw power from the USP-RPS instead.To prevent short circuiting, the RPS (Pro) monitors power continuously. If the power limit threshold is exceeded, the RPS (Pro) will cut off power on the port to protect the device and the port's circuit. PSU Power Overload
We recommend that you protect your networks from harmful outdoor environments and destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For more details, visit: ui.com/toughcableUbiquiti UniFi Gen2 Switches offer a variety of features, including 10G SFP+ ports, PoE+ or PoE++ support, and Layer 3* switching capabilities. (*Layer 3 switching will be available in a future software release).