FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen

Product Information

As for tools, everything necessary and more is included, and Flsun is also generous with other spare parts. But if you adjust the many setting options of 3D printers correctly, very clean prints are also possible.

yeah I am on that, but I have no idea what values to change, as they look different in the robinmini config file, the duet firmware is on 3. In addition, there is an ESP8266 module for a WLAN connection, via which GCodes can be transmitted to the printer via Cura plugin. The approximately 200 watts of heating power seem almost too little here, even though the insulation and heatspreader ensure very even heating. You can recognise this printer because it has a power switch either to the rear of the device (where the power lead is) or to the front, right of the screen.We tested this by plugging a thermistor into the corresponding port on the mainboard instead of the original one and then starting a print. There are no big surprises here in terms of hardware; the limit switches, hotend and extruder are standard parts, as they are also used in many other printers. The print bed heating reaches the maximum temperature of 110°C specified by the manufacturer after 10 minutes, whereby the ambient temperature at the time of the measurement was 16°C. The first model we printed was one of the default 3D printer models that came on the SD card, an FLSUN-branded elephant.

The QQ can run at speeds of up to 300mm/second and has been voted as the fastest 3d printer available in 2021, for under 500 USD.

Unlike I3 3D printer model, Delta 3D printer is a space-saver 3D printer as all axis only move up and down, left, right, front, back movement is not necessary. Energy consumption and noise emissions are at an acceptable level ex-factory, but at least in terms of volume, strong improvements could be achieved with better stepper motor drivers and quieter fans. In the middle of building the 3D printer, when the long sheets of the three sides are not yet installed, the device seams to be unstable. Bit Motherboard - QQ-S PRO is equipped with a 32-Bit motherboard and a separate MOS module, allowing for stable prints even at high printing speed. When the sensor is not in use, it can be attached anywhere on the printer thanks to the strong magnets.

Equipped with a touchscreen, it can resume printing from the breakpoint, save in case of a power outage. After a 30 minute assembly following the maker's included video and instructions, the machine was constructed and powered on.

I have found this from the flsun qqs facebook group that someone made, uploaded it to the SD, started duetwifi 192.

Bit motherboard: New upgrade controller and program, with independent MOS module, more stable and durable, keep the printer high speed printing. Can the extruder of QQ-S Pro be replaced with another type of extruder, such as BMG extruder, which parameters in the firmware need to be modified? The initial setup of delta 3D printers with Marlin is a bit more complicated than with the MKS firmware, but after PID tuning, delta calibration and UBL, i.The individual operating points are rather text-based, but Marlin offers the option of setting German and many other languages in addition to English. All three stepper motors start rotating simultaneously and as soon as a limit switch is reached, only the motor in question is stopped until all three limit switches are finally reached. In principle, both operating concepts are appealing, even if some functions are somewhat hidden in Marlin, since it is not always clear whether a screen element is also an operating element. The good news here, however, is that the printer does at least detect defects or shorted sensor cables.